Journal for Biophysical Chemistry
Table 1 Summary of the effect of the biofunctional polymer pre-coating and thermal treatment of the sample on pattern adhesion and resolution
From: Contactless Laser-Assisted Patterning of Surfaces for Bio-Adhesive Microarrays
Photoinitiator (% w/w) | Biofunctional polymer precoating (water contact angle) | Pre-thermal treatment time (s) at 80 °C (before irradiation) | Post irradiation thermal treatment time at 80 °C (s) | Cooling time at room temperature (s) | Adhesion | Resolution |
|---|---|---|---|---|---|---|
dl-camp (5) | PEMA | 30 | 90 | 120 | + | ++ |
(57°) | ||||||
dl-camp (5) | PPMA | 30 | 90 | 120 | + | + |
(52°) | ||||||
dl-camp (5) | POMA | 30 | 90 | 120 | − | − |
(100°) | ||||||
Irgacure 2959 (0.1) | PEMA | Not necessary | 40 | Not necessary | ++ | ++ |
(57°) | ||||||
Irgacure 2959 (0.1) | PSMA-h | Not necessary | 60 | Not necessary | + | ++ |
(75°) |